Cool Wiring Ideas?

[Brian]

This summer I'm rewiring my SSE with #10 pickups. Right now I have the standard 3 way toggle non-tapping. I'm looking to keep the toggle, two pot setup, but was looking to do something different with the wiring. I know I can put a push-pull on the tone pot and go McCarty, but was looking for suggestions on something cooler. Any ideas/how to do it?

[Big Mike]

You could add a second push pull, or drill for a mini toggell and go series/parallel as well.

[Andrew Chen]

Aren't #10 equipped with vintage style shielded wires and a coil split like the McCarty pickups?

If they are, you won't be able to do anything except coil splitting. You need 4-conductor (or 3 in the PRS case) wires in order to do series/parallel or out-of-phase wiring.

[Brian]

Not sure Andrew-

I know Jo was able to pull a "dial-a-coilsplit" kind of thing with 10s on her TSE. I'm new to wiring so I'm not sure.

[mbpatsfan]

My understanding is that the 10s aren't splittable.

[mbpatsfan]

They're also pretty hard to come by.

[Brian]

I don't know how, but the pusher said i can get a set through him...and they definitely are splittable.

[Andrew Chen]

If PRS is custom winding the 10s, you can probably ask them for modern hookup wiring as opposed to the braided vintage style.