Seymour wiring for a PRS

[Jmilliondead]

i've woke up with my brain still in bed this morning, fitting a seymour to a 2006 CU24, and completely forgotten the wire colouring.. can anyone remind me!

ta :)

[Taller]

Dig into this pile of schematics. They have PRS in there:



http://www.seymourduncan.com/support/schematics.shtml

[Jim Collins]

If you are putting a pair of Duncans into a guitar with a rotary switch, you'll have to flip the magnet in one of the pickups. The color code is:

Duncan red+white = PRS red
Duncan black = PRS red
Duncan green = PRS black
Duncan bare = PRS shield (goes to ground).

If you are only putting one Duncan pickup in, you'll have to make sure that the magnetic polarity of the Duncan pickup is opposite that of the PRS pickup that you are leaving in the guitar. (Or, make sure the magnetic polarity of the Duncan pickup is the same as the PRS pickup you are pulling out.)

[Jmilliondead]

ta very much, just a blank day today as it's something i've done many times! you wouldn't think im a pro-guitar tech would you? lol, weekends my mind shuts off completely i swear